DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
This power unit features a power up power down circuit with load holding on each A & B ports. A stress compensatred flow manage can be added to circuit to regulate the decent velocity of your cylinder.
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean each of the hydraulic components concerned prior to installation of the energy unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which need to also be clean and absolutely free of impurities. N46 hydraulic oil is proposed.
four. The power unit needs to be mounted horizontally.
5. Check the oil degree from the tank just after the preliminary running on the electrical power unit.
six. Oil shifting is required following the initial one hundred operation hrs, afterwards when each and every 3000 hrs.
DUMP TRAILER Power UNIT- SINGLE ACTING
This power unit includes a energy up gravity down circuit. Start the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve might be supplied if demanded. Also a stress compen sated flow handle might be additional to your circuit to regulate the descent pace with the cylinder.
Remark: Please talk to our product sales engineer to the distinct pump displacement, motor power or tank capability.
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all of the hydraulic elements concerned in advance of set up of the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which really should also be clean and totally free of impurities.N46 hydraulic oil is advisable.
4. The power unit should be mounted horizontally.
5. Check the oil level from the tank after the initial running in the energy unit.
six. Oil altering is needed after the preliminary 100 operation hours, afterwards after just about every 3000 hrs.