DC MOTOR PUMP GROUP

DC MOTOR PUMP GROUP 1
Standard Description
Consisting of the hefty duty DC motor plus the CB1S gear pump, this pump motor group is definitely an great hydraulic power unit for mobile hydraulic equipments, such as automobile carriers, mobile aerial lifts, and backup systems.
DC MOTOR PUMP GROUP 2
Common Description
This motor pump includes four.5″ DC motor, a CBSR gear pump with built-in relief valve and check out valve.
DC MOTOR PUMP GROUP three
General Description
This motor pump consists of a 4.5″ DC motor in addition to a CBSR gear pump which has a standard electrical power up/gravity down circuit by using a relief valve, a check out valve in addition to a solenoid release valve.
Exclusive Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic elements concerned before mounting the electrical power unit.
3. Viscosity with the hydraulic oil shoud be 15~68 cst, which should also be clean and free of charge of impurities. N46 hydraulic oil is proposed.
4. The electrical power unit must be mounted horizontally.
five. The relief valve stress is preset about 25% higher compared to the working pressure.
six. Flow control valve for lowing pace adjustment is obtainable unpon request.