Solution Description
PTO Pellet Device
PTO Pellet Machine means energy take- off. It is developed to be related with a tractor or truck so that it can draw energy from their motor. Compared with other pellet mills, it is a lot more flexible, less difficult to operate its structure is far more compact and its occupying place is lessened. Our PTO Pellet Machine is an ideal decision for farm-use finish customers to make distinct varieties of biomass pellets and feed pellets. Materials can be employed to make pellets including a variety of sorts of agro-forestry wastes these kinds of as wooden dust, saw dust, straws, stalks, rice husk, medical herbs, bamboo dust and oil cakes, and so forth.
PTO Pellet Machine Features
1. Our PTO Pellet Machine is related with a tractor or truck for driving energy, which will resolve the problem of electricity transmission, even remote-controlled procedure is available.
two. Undertake new design and style of direct relationship of motor shaft and the main shaft, connected and disconnected effortlessly and conveniently, defeat the loose defect of belt connecting after long time using.
three. High performance and output with minimal energy consumption: affordable and specialist style, the device feeds and presses evenly, and discharges pellets with low damage price.
4. The finished pellets are sleek and even, of large normal hardness and warmth value.
5. Durable and value successful: the core part of the mill-the rollers are manufactured of prescise substance of alloy metal which helps make the roller anti-bearable and no effortless to damaged.
six.A variety of kinds of pore diameter flat die to select.
| Design | Assort Tractor Energy | Die Diameter | Die Hole Specification | Observed Dust Ability | Feed Capacity | Packing Size |
| TOPS120P | six-10HP | 120mm | 2.5-10mm |
forty-sixty kg/h |
sixty-a hundred kg/h | 57*41*seventy six(cm) |
| TOPS150P | 6-12HP | 150mm | 2.5-10mm | fifty-ninety kg/h | ninety-a hundred and twenty kg/h | fifty seven*forty four*76(cm) |
| TOPS200P | ten-18HP | 200mm | 2.5-10mm | a hundred and ten-one hundred forty kg/h | 200-three hundred kg/h | seventy seven*fifty six*102(cm) |
| TOPS230P | 18-28HP | 230mm | two.5-10mm | one hundred fifty-one hundred ninety kg/h | three hundred-400 kg/h | seventy seven*56*102(cm) |
| TOPS260P | 28-45HP | 260mm | two.5-10mm | 220-280 kg/h | four hundred-600 kg/h | seventy seven*fifty six*a hundred and fifteen(cm) |
| TOPS300P | 45-55HP | 300mm | two.5-10mm | 300-350 kg/h | 600-800 kg/h | seventy seven*eighty*116(cm) |
| TOPS360P | fifty-60HP | 360mm | 2.5-10mm | 300-380 kg/h | 700-900 kg/h | seventy seven*eighty five*116(cm) |
| TOPS400P | 50-70HP | 400mm | two.5-10mm | 400-550 kg/h | 900-1100kg/h | 77*85*116(cm) |
Final pellets are produced by our PTO Pellet Equipment
For animal feed , and for fuel .
Our manufacturing facility is 1 specialist maker largely creating types of pellet device, hammer mill and other associated equipment CE, ISO certification. It has produced into a team business whose enterprise integrates scientific study, production, coaching and international trade with more than 100 employees, including 6 senior engineers, 19 mechanical designers, technicians twenty.
PTO series pellet equipment images
| Type: | Flat Die Cone Wheel |
|---|---|
| Automatic Grade: | Manual |
| Controlling Mode: | Tractor |
| Energy Saving: | Energy Saving |
| Certification: | CE, ISO |
| Warranty: | 1 Year |
###
| Samples: |
US$ 700/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | Assort Tractor Power | Die Diameter | Die Hole Specification | Saw Dust Capacity | Feed Capacity | Packing Size |
| TOPS120P | 6-10HP | 120mm | 2.5-10mm |
40-60 kg/h |
60-100 kg/h | 57*41*76(cm) |
| TOPS150P | 6-12HP | 150mm | 2.5-10mm | 50-90 kg/h | 90-120 kg/h | 57*44*76(cm) |
| TOPS200P | 10-18HP | 200mm | 2.5-10mm | 110-140 kg/h | 200-300 kg/h | 77*56*102(cm) |
| TOPS230P | 18-28HP | 230mm | 2.5-10mm | 150-190 kg/h | 300-400 kg/h | 77*56*102(cm) |
| TOPS260P | 28-45HP | 260mm | 2.5-10mm | 220-280 kg/h | 400-600 kg/h | 77*56*115(cm) |
| TOPS300P | 45-55HP | 300mm | 2.5-10mm | 300-350 kg/h | 600-800 kg/h | 77*80*116(cm) |
| TOPS360P | 50-60HP | 360mm | 2.5-10mm | 300-380 kg/h | 700-900 kg/h | 77*85*116(cm) |
| TOPS400P | 50-70HP | 400mm | 2.5-10mm | 400-550 kg/h | 900-1100kg/h | 77*85*116(cm) |
| Type: | Flat Die Cone Wheel |
|---|---|
| Automatic Grade: | Manual |
| Controlling Mode: | Tractor |
| Energy Saving: | Energy Saving |
| Certification: | CE, ISO |
| Warranty: | 1 Year |
###
| Samples: |
US$ 700/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | Assort Tractor Power | Die Diameter | Die Hole Specification | Saw Dust Capacity | Feed Capacity | Packing Size |
| TOPS120P | 6-10HP | 120mm | 2.5-10mm |
40-60 kg/h |
60-100 kg/h | 57*41*76(cm) |
| TOPS150P | 6-12HP | 150mm | 2.5-10mm | 50-90 kg/h | 90-120 kg/h | 57*44*76(cm) |
| TOPS200P | 10-18HP | 200mm | 2.5-10mm | 110-140 kg/h | 200-300 kg/h | 77*56*102(cm) |
| TOPS230P | 18-28HP | 230mm | 2.5-10mm | 150-190 kg/h | 300-400 kg/h | 77*56*102(cm) |
| TOPS260P | 28-45HP | 260mm | 2.5-10mm | 220-280 kg/h | 400-600 kg/h | 77*56*115(cm) |
| TOPS300P | 45-55HP | 300mm | 2.5-10mm | 300-350 kg/h | 600-800 kg/h | 77*80*116(cm) |
| TOPS360P | 50-60HP | 360mm | 2.5-10mm | 300-380 kg/h | 700-900 kg/h | 77*85*116(cm) |
| TOPS400P | 50-70HP | 400mm | 2.5-10mm | 400-550 kg/h | 900-1100kg/h | 77*85*116(cm) |
PTO Shafts and PTO Shaft Shields
When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.
540 rpm
A 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.
Safety chains
Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.
Shield
The PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.
Reverse rotation
The PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
editor by czh 2022-12-29