Materials Managing Power UNIT two
This energy unit features electrical power up gravity down circuit. Activate the begin solenoid to start the motor to lift the machine. The lowing motion is activated by the solenoid valve using the decreasing velocity managed through the pressure compensated flow handle valve. Products of this series might be widely utilized in the field of logistic devices which include fork lift, mini lift table, and so forth.
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic components concerned just before mounting the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which must also be clean and free of charge of impurities, N46 hydraulic oil is advisable .
4. Oil shifting is required soon after the initial one hundred operation hrs,afterwards the moment every single 3000 hours.
5. The power unit ought to be mounted horizontally.
Material Managing Electrical power UNIT one
This power unit is intended for the fork lift business, consisting of extremely efficient gear pump, DC motor, guide raise and reduced valve, tank, ect. The up and down movement are controlled by the lever on the manual release valve, which is equipped with an electrical switch to activate the motor. The lowing speed is controlled by the strain compensated flow handle valve.
1. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean all the hydraulic elements concerned prior to installation of the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which should really also be clean and totally free of impurities, N46 hydraulic oil is encouraged .
four. Oil shifting is required after the preliminary a hundred operation hrs, afterwards the moment every 3000 hours.
five. The electrical power unit shown is intended to be mounted horizontally.