ep

January 13, 2021

Any damage to the teeth surfaces of the sprocket diminishes the lifestyle on the conveyor chain.
With typical sprockets, significantly worn sprocket teeth had been repaired by teeth padding or the total sprocket was replaced. In either situation, repair was pricey and with teeth padding, accuracy was impaired. We developed new sprockets with detachable teeth for independent replacement. This sprocket is highly rated by our clients to the dramatic financial savings in price and time.
Structure
The teeth is often replaced by two approaches: individual tooth replacement or sectional teeth substitute.
The bolts and nuts used for mounting the teeth on to your sprocket are spot-welded to prevent loosening.
The respective structures are illustrated around the appropriate.
The over photo and also the best correct illustration demonstrate a sprocket for individual tooth substitute. Because the joint face between the replaced teeth as well as sprocket is formed within a exceptional arc, the bonding accuracy is large plus the sprocket power is enhanced. In addition, since the load acting about the mounting bolts is decreased, there is much less chance of loosening. This sprocket building is patented.
You will discover two forms of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilised for large sprockets getting heavy loads and welded sheet steel hubs for other applications.